Sound - Panasonic DMR-EZ48V Operating Instructions Manual

Sound

(All factory default settings are indicated with underlined text.)
Dynamic Range Compression
[DVD-V] (Dolby Digital only)
Change the dynamic range for late night viewing.
[On]
Bilingual Audio Selection
(Analogue broadcast only)
Select whether to record the main or secondary audio type when:
≥Recording or copying to a DVD-R, DVD-R DL, DVD-RW (DVD-
Video format), +R, +R DL and +RW.
≥Recording or copying sound in LPCM (➡ right, "Audio Mode for
XP Recording").
[M 1]
≥You cannot select the audio on this unit when recording from an
external source, such as when copying from a video cassette
recorder (except from DV equipment connected to this unit's DV
input terminal). Select the audio on the other equipment.
≥When recording from the unit's DV terminal, select the type of
audio recording from "Audio Mode for DV Input" (➡ right).
Digital Audio Output
Change the settings when you have connected equipment through
this unit's DIGITAL AUDIO OUT terminal (➡ 68).
≥Press [OK] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz.
≥Signals are converted to 48 kHz despite the settings below if
the signals have a sampling frequency of over 96 kHz, or the
disc has copy protection.
[On] Signals are converted to 48 kHz. (Choose when the
connected equipment cannot process signals with a
sampling frequency of 96 kHz.)
[Off] Signals are output as 96 kHz. (Choose when the
connected equipment can process signals with a
sampling frequency of 96 kHz.)
Dolby Digital
Select how to output the signal.
Select "Bitstream" if the connected equipment decodes the signal.
Select "PCM" if this unit decodes the signal and outputs it as 2 channels.
≥Not making the proper settings may result in noise.
[Bitstream] When connecting to equipment displaying the
Dolby Digital logo.
[PCM] When connecting to equipment not displaying the
Dolby Digital logo.
DTS
Select how to output the signal.
Select "Bitstream" if the connected
equipment decodes the signal.
Select "PCM" if this unit decodes the signal
and outputs it as 2 channels.
≥Not making the proper settings may
result in noise.
[Bitstream] When connecting to equipment displaying the
DTS logo.
[PCM] When connecting to equipment not displaying the
DTS logo.
MPEG
Select how to output the signal.
Select "Bitstream" if the connected equipment decodes the signal.
Select "PCM" if this unit decodes the signal and outputs it as 2
channels.
≥Not making the proper settings may result in noise.
[Bitstream] When connected to equipment with a built-in
MPEG decoder.
[PCM] When connected to equipment without a built-in
MPEG decoder.
[Off]
[M 2]
Audio Mode for XP Recording
Choose the audio type when recording or copying with XP mode.
[Dolby Digital] (➡ 81) [LPCM] (➡ 81)
≥The picture quality of LPCM recordings may be lower than that
of normal XP mode recordings.
≥The audio recording becomes Dolby Digital even if you selected
LPCM when using a recording mode other than XP.
≥When recording a bilingual broadcast, select the type of audio in
advance from "Bilingual Audio Selection" (➡ left).
Audio Mode for DV Input
You can select the kind of audio when recording from the unit's DV
input terminal ( ➡ 28).
[Stereo 1] Records audio (L1, R1).
[Stereo 2] Records added audio such as narration (L2, R2)
subsequent to original recording.
[Mix] Records both Stereo 1 and Stereo 2.
≥When recording bilingual broadcast, select the type of audio in
advance from "Bilingual Audio Selection" (➡ left).
RQT9127
61