Important Notes For Recording - Panasonic DMR-EZ48V Operating Instructions Manual

Important notes for recording

Selecting Audio for
Broadcast in multi-channel sound (Digital broadcast only):
You can select the audio language when receiving audio in
Recording
multi channel broadcast ["Multi Audio" appears at the bottom of
digital channel information display (➡ 15)].
However, audio cannot be switched after recording.
Bilingual broadcasts (Analogue broadcast only):
[RAM] [VHS]
Both main and secondary audio can be recorded.
You can change the audio during playback.
(➡ 33, Changing audio during play)
However in the following cases, select whether to record the
main or secondary audio:
If you record from external equipment
– Select "M 1" or "M 2" on the external equipment.
[RAM]
About the aspect
[-R] [-R]DL] [-RW‹V›]
when recording a
If "Aspect for Recording" in the Setup menu is set to
programme
"Automatic" (The default setting is "Automatic" ➡ 60), the
programme will be recorded in the original aspect used when
recording started (including when recording started at a
commercial, etc.). If recorded with a different aspect, select the
correct aspect ("16:9" or "4:3").
However, in the following cases, programme will be recorded in 4:3.
≥[-R] [-R]DL] [-RW‹V›] Programme recorded using "EP" or "FR
(recordings 5 hours or longer)" recording modes will be
recorded in 4:3 aspect.
When recording the
It is not possible to record the broadcasts that allow "One time only recording" onto DVD-R, DVD-R DL, DVD-RW, +R, +R DL,
+RW or 8 cm DVD-RAM discs. Use CPRM (➡ 81) compatible DVD-RAM.
"One time only
recording"
[RAM] CPRM compatible discs only.
broadcasts
≥Even when copying to videotape the title may not be copied correctly because of the copy guard.
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
Playing the disc on
The disc must be finalised after recording or copying (➡ 56).
other DVD players
It is necessary to finalise DVD-R, etc. on this unit after recording or copying titles to them. You can then play them as a commercially sold DVD-
Video. However, the discs become play-only and you can no longer record or copy.
§
[+RW] If the disc failed to play on other equipment, we recommend you create top menu (➡ 57).
Recording to DVD-R DL DVD-R DL and +R DL discs have two layers of recording surface on one side.
≥It is not possible to record continuously from the first layer to the second layer. Recording stops when
and +R DL
space on the first layer becomes full. You must close the first layer to start recording on the second layer (➡ 57).
Closing makes the first layer unavailable for recording (editing is still available). You cannot cancel closing. Make
certain before proceeding.
DVD-R DL
+R DL
≥It is not possible to record to both the DVD and the VHS drive simultaneously.
–Recording sound in LPCM (➡ 61,
M 1 M 2
Audio Mode for XP Recording)
Hello Hallo
You can record and copy again if you format DVD-RW.
Record to DVD-R, etc.
(Disc inner
side)
Hello
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Select the main or secondary audio before
recording
(➡ 61, Bilingual Audio Selection)
[VHS]
The original aspect used for the source
programme will also be used with the recording.
[+R] [+R]DL] [+RW]
The programme will be recorded in 4:3 aspect.
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]

§
Finalise
The second layer
The available
space
The first layer
Title 1 Title 2
Recording/Playback direction
Hola Hallo
Select the audio that you want to
record in "DVB Multi Audio" in the
on-screen menu (➡ 54).
M 1
Hello
The selected
audio only is
recorded.
(≤: Can do, –: Cannot do)
Play on other DVD equipment
CHG
/I DOUBLE RE-MASTER CD SEQUENTIAL DISC 1 2 3 4 5 ; 1 :/ /9 DISC EXCHANGE DISC SKIP <OPEN/CLOSE
IN DC
9V
It is not possible
to record
continuously
from the first
layer to the
second layer.
(Disc outer
side)
RQT9127
23