To Cancel Recording When Recording Has Already Begun; To Release The Unit From Recording Standby; Notes On Timer Recording; Check, Change Or Delete A Programme - Panasonic DMR-EZ48V Operating Instructions Manual

Advanced timer recording
To cancel recording when recording
has already begun
1
While the unit is on
Press [DRIVE SELECT] to select the
recording drive and press [∫].
Stop Recording
Timer recording in progress.
Stop this timer recording?
It will be cancelled if you stop.
Stop Recording
SELECT
OK
2
Press [2, 1] to select "Stop
Recording" and press [OK].
If you stop a timer recording, it will be cancelled. However, if
you have set a weekly, daily timer recording, the recording will
start from the next time the timer recording is set.
To release the unit from recording
standby
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
1
Press [PROG/CHECK].
2
Press [3, 4] to select the programme
and press the "Red" button.
≥The timer icon "F" (➡ right) disappears from the timer
recording list.
≥You cannot cancel timer recording standby mode as long as
even one timer icon "F" (➡ right) remains in the timer
recording list.
≥Press the "Red" button again to activate timer recording
standby.

Notes on timer recording

≥When a timer recording is set, DVDs that were recorded using a
different TV system cannot be played unless the TV system is
changed in the Setup menu (➡ 62) or the timer recording has
completed or has been cancelled.
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even when
playing.
≥Timer recordings do not begin while editing or copying.
≥If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
≥If the unit is not put in the timer recording standby mode at the last
10 minutes before the programmed timer recording starting time,
the "F" flashes on the unit's display.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
Programme
Recorded
RQT9127
30
Cancel
RETURN
Programme
Not recorded
Recorded

Check, change or delete a programme

≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
Timer Remain DVD 1:58 SP
Recording
VHS --:----
No. Name Date Start Stop
New Timer Programme
C
Press OK to store new programme.
OK
RETURN
A Icons
F
Timer recording standby is activated.
[
This programme is currently recording.
Programmes are overlapped. Recording of the
programme with the later start time starts when the
earlier programme finishes recording.
You stopped a weekly or daily timer recording. The icon
disappears the next time the timer programme starts
recording.
The disc was full so the programme failed to record.
The programme was copy-protected so it was not
recorded.
X The programme did not complete recording because
the disc is dirty or some other reason.
Drive: Recording drive is set to DVD or VHS.
B Message displayed in the "Drive space" line
OK: Displayed if the recording can fit in the
remaining space. [DVD]
> (Date): For recordings made daily or weekly, the display
will show until when recordings can be made (up
to a maximum of one month from the present
time) based on the time remaining on the disc.
! : It may not be possible to record because:
≥The disc is write-protected. [DVD]
≥There is no more space left. [DVD]
≥The number of possible titles has reached its
maximum. [DVD]
≥The new timer recording will completely or
partially record over this timer recording.
All other recordable cases. [VHS]
– – :
C Channel name, programme name and other
information are displayed
∫ To change a programme
Press [3, 4] to select the programme and press [OK]. (➡ 29,
right column, step 3)
∫ To delete a programme
Press [3, 4] to select the programme and press [¢ DELETE].
You can also delete a programme with the following steps
1 Press [3, 4] to select the programme and press [OPTION].
2 Press [3, 4] to select "Delete" and press [OK].
∫ To exit the timer recording list
Press [PROG/CHECK].
[Note]
≥Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
TUE 14.10.08. 12:54:00
Drive
Mode
Drive space