Setting The Squelch Type For Transmission And Reception Sql Expantion Function; Setting The Type Of Tone Squelch; Selecting A Tone Frequency; Setting The Sound And Speed During Tone Search Tone Search Function - Yaesu FT1DR Operating Manual

Setting the squelch type for transmission and reception
SQL EXPANTION FUNCTION
Squelch types set beforehand can function separately for transmission and reception.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [4 SIGNALING].
2
Press H.
3
Turn O to select [10 SQL EXPANTION].
4
Press H.
5
Turn O to select [ON].
6
ON: Use separate squelch for transmission and reception.
OFF: Use the same squelch for transmission and
reception.
Remark Default: OFF
Press p to save the separate squelch setting, and exit the
7
Set mode.

Setting the type of tone squelch

Set the tone squelch to open the squelch only when a signal containing the specified
frequency tone is received.
For more details, see "Using the Tone Squelch Function" on page 84.

Selecting a tone frequency

Select the tone frequency from 50 types between 67.0 MHz and 254.1 MHz.
For more details, see "Setting a Tone Frequency" on page 85.
Setting the sound and speed during tone search
Tone Search Function
Sound can be muted during tone search. The operation speed of the tone search can
also be changed.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [4 SIGNALING].
2
Press H.
3
Set Mode
121