Table of Contents
Advertisement
Optional Equipment
42
LP Conversion Instructions
WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer's
instructions and all applicable codes and requirements of the authority having jurisdiction. If the
information in these instructions is not followed exactly, a fire, explosion or production of carbon
monoxide may result causing property damage, personal injury or loss of life. The qualified service
agency is responsible for the proper installation of this kit. The installation is not proper and complete until
the operation of the converted appliance is checked as specified in the manufacturer's instructions
supplied with the kit.
Install the LP conversion kit prior to installing the burner.
Remove the glass (see page 36).
The GSR Stepper Motor Kit (SKU 94400999) is required for converting this appliance to LP. This
kit contains the stepper motor (regulator) and torx wrench necessary for installation.
Installation
1. Remove and discard the burner bracket as shown below.
© Travis Industries
(
for qualified installers only)
4141013
42
100-01414
Hide quick links:
Advertisement
Table of Contents
