Barrier Removal - Travis Industries 564 HO GSR2 Installation Manual

Barrier Removal

A barrier designed to reduce the risk of burns from the hot viewing glass is provided with this
appliance and shall be installed for the protection of children and other at-risk individuals.
If the barrier becomes damaged, the barrier shall be replaced with the manufacturer's barrier for
this appliance.
If using a face or grill that requires use of a cove cover, use the cove cover included with the
fireplace (see below). Do not use the cover included with face or grill (if applicable).
HINT FOR REPLACING THE BARRIER: Hold the barrier at an angle and insert
the bottom slots first. Then pivot the barrier forward to engage the top hooks.
© Travis Industries
Installation
(
Cove Cover
for qualified installers only)
Lift the barrier up, pivot the top forward,
and remove from the fireplace.
If using a face or grill that
requires use of a cove cover,
place the cove cover in place
and bend the tabs down to
secure.
4141013
39
100-01414