Device Menu - Olympus DS-5500 Instruction Manual

Device Menu

Memory Select
You can switch the recording media between [Built-
in Memory] and [SD Card] (default).
• The recording media will appear on the display as
[ ] or [ ].
Cue/Rev
The playback sound of Cue and Review operation
and Cue and Review speed can be set.
1 Select [Sound] or [Speed].
3
[Sound]:
Set the playback sound of Cue and Review to
On or Off.
[Speed]:
Set the Cue and Review speed.
2 Select the options.
When [Sound] is selected:
[On]:
Activate the playback sound of Cue and
Review.
[Off]:
Disables this function.
When [Speed] is selected:
You can adjust the Cue and Review speed level
from [Speed1] to [Speed5].
• Cue and Review speed level becomes faster as
the numerical value becomes larger.
Power Save
By default, the recorder will enter into Power Save
mode if not used for more than 10 minutes.
[5minutes] [10minutes] [30minutes] [1hour]:
Set the length of time before the recorder will
enter into Power Save mode.
[Off]:
Disables this function.
• If any button is pressed, time count will restart.
Time & Date
Setting the time and date beforehand enables easier
EN file management.
For details, see "Setting time and date
[Time & Date]" (☞ P.20).
42
Battery
You can set the type of batteries used with the
recorder.
For details, see "Setting battery type [Battery]"
(☞ P.20).
USB Class
You can set the USB class of the recorder depending
on the intended use.
[Composite]:
In the 3 classes of Storage, USB audio and human
interface device, USB connection is possible. While
connected via USB in [Composite], the recorder
can be used as the USB speaker and the USB
microphone in addition to storage class.
[Storage Class]:
USB connection is possible in only storage class.
Reset Settings
You can reset the menu settings to their default
values.
[Start]:
The menu settings will be reset.
[Cancel]:
The reset will be canceled.
• Even if the settings are reset, the time settings and
file numbers will not return to their initial settings.
The settings before the reset will be preserved.
Format
You can format the built-in memory or SD card used
with the recorder.
• Formatting will erase all the stored data including
locked files.
For details, see "Formatting the memory [Format]"
(☞ P.45).
Memory Info.
Memory capacity and remaining memory space
for the build-in memory and SD card in use will be
displayed.
System Info.
System information about the recorder like the
[Model], [Version] and [Serial No.] can be displayed.
Menu items