Olympus DS-30 Getting Started
Hide thumbs
Also See for DS-30:
- Instructions manual (305 pages) ,
- Online instructions manual (163 pages) ,
- Manuel du propriétaire (87 pages)
Advertisement
Quick Links
Olympus Digital Voice Recorder
DS-30/40/50
Using the Recorder
Getting Started
1. Insert Two AAA batteries into the bottom of your voice recorder.
2. To power on your voice recorder there is a power slide on the right side of your recorder.
Slide it down to power on. To make sure your recorder does not accidentally turn off
when recording slide the power slide up into the Hold position once it is on. If you need
to access the menu, do not put it in the Hold position because you will be unable to use it
in this setting.
3. Because you will most likely be using your recorder with a GPS tracker it is important to
have the recorder set to the proper time. When you power on your recorder for the first
time the recorder will ask you to set the time. If the recorder has been used before and
you need to set the date hold down the menu button until the menu appears. Then scroll
through the menu with the + and – buttons until you find Time and Date. Select Time
and Date with the OK button. Use the + and – buttons to change the selected number.
Advertisement
Related Manuals for Olympus DS-30
Summary of Contents for Olympus DS-30
- Page 1 Olympus Digital Voice Recorder DS-30/40/50 Using the Recorder Getting Started 1. Insert Two AAA batteries into the bottom of your voice recorder. 2. To power on your voice recorder there is a power slide on the right side of your recorder.
- Page 2 2. Press the REC button on the right side of the recorder. It is the top button with a red circle on it. Right above the word Olympus there is a little red light. When the device is in recording mode, the light turns red.
- Page 3 b. S. Play (Slow Playback): Playback speed slows down, and S> will turn on. (Default at .75 times as fast). c. F. Play (Fast Playback): Playback speed becomes faster, and F>> will turn on. (Default at 1.5 times as fast). 2.
- Page 4 5. Press the OK button. Connecting the Recorder to the Computer 1. Turn the recorder’s power on. 2. Connect the USB connection cable to the USB port or the USB hub of the PC. 3. Confirm that the recorder has stopped and connect a USB cable to the connection port on the side of the recorder.