Olympus DS-5500 Instruction Manual page 21

Press the OK/MENU button to complete
3
the setting.
• The clock will start from the set date and time.
Press the OK/MENU button according to the
time signal.
Notes
• Moving the slide switch to a position other than
STOP (4) while setting the time and date will
cancel the time and date setting. The recorder will
return to the previous time and date.
• You can set the time and date from your PC using
ODMS and DSS Player software (☞ P.47).
Changing the time and date
If the current time and date is not correct, set it using
the procedure below.
While the recorder is in stop mode, press
1
the OK/MENU button.
Press the + or − button to select [Device
2
Menu].
Press the OK/MENU button.
3
Press the + or − button to select
4
[Time & Date].
Device Menu
Memory Select
Cue/Rev
Power Save
Time & Date
Battery
USB Class
BACK EXIT
Press the OK/MENU button.
5
• The following steps are the same as Step 1
through Step 3 of "Setting time and date
[Time & Date]" (☞ P.20).
Press the F3 (EXIT) button to close the
6
menu screen.
Setting time and date
1
EN
21