Device Menu - Olympus DS-5500 Instructions Manual

Device Menu

Memory Select
You can switch the recording media between [Built-
in Memory] (default) and [SD Card].
• The recording media will appear on the display as
[ ] or [ ].
Cue/Rev
The playback sound of Cue and Review operation
and Cue and Review speed can be set.
1 Select [Sound] or [Speed].
[Sound]:
Set the playback sound of Cue and Review to
On or Off.
[Speed]:
Set the Cue and Review speed.
2 Select the options.
When [Sound] is selected:
[On]:
Activate the playback sound of Cue and
Review.
[Off]:
Disables this function.
When [Speed] is selected:
You can adjust the Cue and Review speed level
from [Speed1] to [Speed5].
• Cue and Review speed level becomes faster as
the numerical value becomes larger.
Power Save
By default, the recorder will enter into Power Save
mode if not used for more than 10 minutes.
[5minutes] [10minutes] [30minutes] [1hour]:
Set the length of time before the recorder will
enter into Power Save mode.
[Off]:
Disables this function.
• If any button is pressed, time count will restart.
Time & Date
Setting the time and date beforehand enables easier
file management.
For details, see "Setting time and date
[Time & Date]" (☞ P.18).
USB Connect
You can set the type of USB connection for charging
the batteries.
[PC]:
Used to connect the recorder to a PC via the USB
cable.
[AC Adapter]:
Used to connect the recorder to a USB-connecting
AC adapter via the USB cable.
[Optional]:
Every time the recorder is connected to a PC or
a USB-connecting AC adapter via the USB cable,
the screen to set the type of USB connection will
appear.
USB Class
You can set the USB class of the recorder depending
on the intended use.
[Composite]:
In the 3 classes of Storage, USB audio and human
interface device, USB connection is possible. While
connected via USB in [Composite], the recorder
can be used as the USB speaker and the USB
microphone in addition to storage class.
[Storage Class]:
USB connection is possible in only storage class.
Reset Settings
You can reset the menu settings to their default
values.
[Start]:
The menu settings will be reset.
[Cancel]:
The reset will be canceled.
Menu items
3
EN
41