Setting Battery Type And Time/Date; Setting Battery Type [Battery]; Setting Time And Date [Time & Date] - Olympus DS-5500 Instruction Manual

Setting battery type and time/date

When you use the recorder for the first time
after purchasing it, or when the batteries
have been inserted without the device
being used for a long time, the battery
type setting screen and the time/date
setting screen will appear. Also, the battery
type setting screen will appear after the
1
batteries are replaced.
However, when a Password has been set
as the device lock function (☞ P.34), the
recorder will go to the battery type setting
screen and the time/date setting screen
after verification (unlocking).

Setting battery type [Battery]

1 Turn on the recorder (☞ P.18).
• The battery type setting screen will appear
after displaying message [Please select
Battery].
Battery
Ni-MH
Alkaline
BACK
EN
20
F1, F2, F3 button
OK/MENU button
+, − button
9, 0 button
EXIT
Press the + or − button to select [Ni-MH]
2
or [Alkaline].
[Ni-MH]:
Select when Ni-MH rechargeable batteries are
used.
[Alkaline]:
Select when alkaline batteries are used.
• The setting status will appear on the display as [
(Ni-MH) or [ ] (alkaline).
Al
Press the OK/MENU button to complete
3
the setting.
• The time/date setting screen may appear after
displaying message [Set Time & Date]. In this
case, follow the steps given in "Setting time
and date [Time & Date]".
Setting time and date [Time & Date]
If you set the time and date beforehand, the
information when the file is recorded is automatically
stored for each file. Setting the time and date
beforehand enables easier file management.
Press the 9 or 0 button to select
1
the item to set.
Time & Date
10 14 2013
M D Y
5: 00
PM
BACK 24H EXIT
Press the + or − button to set.
2
Time & Date
10 14 2013
M D Y
5 : 45
PM
BACK 24H EXIT
• You can select the order of the "Month", "Day"
and "Year" by pressing the F2 (D/M/Y) button
while setting them.
Ni
Select the item from the
"hour", "minute", "year",
"month" and "day" with a
flashing point.
You can select between 12 and
24 hour display by pressing
the F2 (24H) button while
setting the hour and minute.
]