Set Lengths For Code 11 - Symbol LS1900 Series Product Reference Manual

Programming the Scanner

Set Lengths for Code 11

Lengths for Code 11 may be set for any length, one or two discrete lengths, or lengths within
a specific range. The length of a code refers to the number of characters (i.e., human
readable characters), including check digit(s) the code contains.
One Discrete Length - This option allows you to decode only those codes containing a
selected length. For example, if you select Code 11 One Discrete Length, then scan 1, 4,
only Code 11 symbols containing 14 characters are decoded. Numeric bar codes begin
on page 4-119. If you make an error or wish to change your selection, scan CANCEL
on page 4-121.
Code 11 - One Discrete Length
Two Discrete Lengths - This option allows you to decode only those codes
containing two selected lengths. For example, if you select Code 11 Two Discrete
Lengths, then scan 0, 2, 1, 4, only Code 11 symbols containing 2 or 14 characters
are decoded. Numeric bar codes begin on page 4-119. If you make an error or wish
to change your selection, scan CANCEL on page 4-121.
Code 11 - Two Discrete Lengths
4-87