17
Using FLIR Cloud™ Client for PC or Mac
2. Click
.
3. Under Cruise ID, select the number of the tour you would like to configure.
4. (Optional) Under Cruise Name, enter a name for the tour.
5. Use the chart to select which presets you would like to include in the tour and the or-
der of presets.
• Preset: Select the preset number.
• Time(s): Enter the time in seconds the camera will remain on the selected preset.
• Operation: Click
the tour.
6. Click OK to save changes.
To run a PTZ tour:
1. Select the tour number and click
17.3.3 PTZ Pattern
Patterns automatically cycle the camera between two positions.
To create a pattern:
1. Click
to open the Advanced controls. Select Pattern.
2. Select the number of the pattern you would like to set up.
3. Move the camera into the desired start position.
#LX400060; r.30328/35049; en-US
to add a preset to the tour. Click
.
to delete a preset from
82