20
LHV2000 Series Hard Drive Installation
6. Replace the cover and cover screws (6x).
NOTE
After installation, you must format the hard drive in order to use it with the system. See 20.3 Format-
ting Hard Drives, page 151.
20.2.2 LHV2216
CAUTION
Make sure that the system is OFF and ALL power adapters have been disconnected before removing/
installing the hard drive.
1. Power off the system, and unplug all cabling from the system.
2. Remove the rear panel screws (4x). Remove the cover.
3. Turn the system over and loosen the hard drive screws (4x), but do not remove them.
4. Disconnect the SATA power and data cable from the hard drive.
#LX400060; r.30328/35049; en-US
150