Configuring The Snapshot Schedule - Lorex LHV2000 Series Instruction Manual

15 Using the Main Menu
To configure pre-recording:
1. From the Main Menu, click
2. Under Channel, select the camera you would like to configure or select All.
3. Under PreRecord, select the duration for pre-recording.
4. Click OK to save settings.

15.3.14 Configuring the Snapshot Schedule

You can set a schedule for recording snapshots from the cameras.
To set up the snapshot schedule:
1. From the Main Menu, click
2. Under Channel, select the channel you would like to configure or select All.
3. Configure the schedule as needed:
• Check Continuous or MD (motion detection) to select the recording type you
would like to configure.
• Click and drag on each day to customize the recording schedule. The schedule is
set up as a grid, which each block representing one hour.
• Click next to All to link the recording schedules for all days. The icon for a
day changes to
ual days to link them to each other. If the recording schedule is linked, changes
made to one of the days will apply to every day that is linked.
• Click to disable all recording of the selected type on the selected day.
• Click if you need to set a more precise schedule down to the minute.
#LX400060; r.30328/35049; en-US
and then click Storage>Schedule>Record.
and then click Storage>Schedule>Snapshot.
when it is linked. You can also click the boxes next to individ-
63