Using Video Clip Backup - Lorex LHV2000 Series Instruction Manual

13 Backup
6. Check files you would like to backup and then click Backup. Wait for the backup to
complete.
NOTE
HD video files saved on the system may take up a large amount of disk space. The size of video
files selected and the amount of free space on your USB device is shown at the top of the screen.

13.3 Using Video Clip Backup

Video clip backup allows you to select a duration of video during playback mode and
save it to a USB device (not included).
To use Video Clip Backup:
1. Insert a USB flash drive (not included) or USB external hard drive (not included) into
one of the USB ports.
2. Start playing back video using the steps in 12.1 Playing Back Video from the Hard
Drive, page 27.
3. Click to mark the beginning of the video clip. Click
video clip.
4. Click to open the Backup menu.
5. Configure the following:
5.1. Check the USB device where you would like to save the file.
5.2. Check the files you would like to backup.
5.3. Click Backup . Then click Start. Wait for the backup to complete before re-
moving the USB flash drive.
#LX400060; r.30328/35049; en-US
to mark the end of the
33