Presets; Tours - Lorex LHV2000 Series Instruction Manual

21
Connecting a PTZ Camera (LHV2000 Series)
10. Auto scan: Click to run the selected autoscan.
11. Aux: Click to open the aux menu, where you can set up Presets, Tours, Patterns, and
Auto Scans.

21.2.1 Presets

Presets will save a camera position for quick retrieval.
To add presets:
1. Click to open the aux menu.
2. Click the Preset tab.
3. Enter the number of the preset you want to create under Preset.
4. Move the camera to the desired position and click Set.
To go to a preset:
• Under No., select the number of the preset you would like to go to and click

21.2.2 Tours

Tours will cycle through a set of presets.
To create a tour:
1. Click to open the aux menu.
2. Click the Tour tab.
3. Under Patrol No., select the tour you would like to configure.
4. Under Preset, select a preset you would like to add to the tour.
5. Click Add Preset.
6. Repeat steps 4 and 5 to add additional presets to the tour.
NOTE
Click Del Tour to clear all presets from a tour.
To run a tour:
• Under No., select the number of the tour you would like to go to and click
#LX400060; r.30328/35049; en-US
.
.
155