Using The Event List - Lorex LHV2000 Series Instruction Manual

18
Connecting to your System Using Smartphone or Tablet Apps
NOTE
Your cameras must have motion detection activated to receive push notifications.
To enable Push Notifications:
1. Tap to access the Menu, and then tap Push Config.
2. Tap the system you would like to configure.
3. Tap Motion Detect and then check each channel you would like to receive push noti-
fications from.
4. Under Push type, select Video to attach a video clip to each push notification. Or,
select Image to attach an image to each push notification.
5. Tap to save changes. You will now receive a notification when one of the se-
lected cameras detect motion.

18.3.8 Using the Event List

The Event List menu shows a list of events that were sent to your device via push
notifications.
NOTE
You must configure push notifications before you can use the Event List.
#LX400060; r.30328/35049; en-US
130