Configuring Pre-Recording; Configuring The Snapshot Schedule - Lorex DV700 Series Instruction Manual

15 Using the Main Menu

15.3.13 Configuring Pre-Recording

The system can pre-record video when motion detection events occur.
To configure pre-recording:
1. From the Main Menu, click
2. Under Channel, select the camera you would like to configure or select All.
3. Under PreRecord, select the duration for pre-recording.
4. Click OK to save settings.

15.3.14 Configuring the Snapshot Schedule

You can set a schedule for recording snapshots from the cameras.
To set up the snapshot schedule:
1. From the Main Menu, click
2. Under Channel, select the channel you would like to configure or select All.
#LX400060; r.30328/30328; en-US
and then click Storage>Schedule>Record.
and then click Storage>Schedule>Snapshot.
66