Advertisement
(1) Filling the Sub Tank
1 Remove the sub tank cap.
2 Add coolant to the FULL level.
3 Re-install the cap.
(2) Filling the Radiator
1 Remove the top plate.
2 Remove the radiator cap.
3 Add coolant to the top.
4 Re-install the radiator cap.
5 Re-install the top plate.
<Caution>
•
Use soft water, such as tap water.
•
If the ambient temperature is near freezing, use Long Life Coolant (LLC) at a mixture ratio of
30%-45%, depending on the ambient temperature.
•
This equipment has a 30% mixture ratio of LLC when shipped from the factory.
•
Replace LLC at yearly intervals or 2000 hours of operation whichever comes first.
Top Plate
Lowest Ambient
Temperature
Mixture Ratio
8-3 Checking Fuel
Caution: Fire
•
Do not operate this equipment with any fuel leak. Wipe up any spilled fuel immediately.
Fuel tank level is indicated on an illuminated fuel gauge on the control panel. Check the fuel level prior to
starting and refill if necessary.
<Caution>
•
Use Diesel fuel, ASTM D975 No.2-D.
Suggested LLC Mixture Ratio
+5ºF
30%
15
Radiator Cap
Radiator Fill
-4ºF
-22ºF
35%
45%
Sub Tank
Advertisement
