Download Print this page

Shindaiwa DGW400DM-C Owner's Manual page 15

Sound attenuated diesel engine powered welder/generator
Hide thumbs Also See for DGW400DM-C:

Advertisement

<Caution>
If the equipment is not level, you cannot obtain an accurate oil level reading.
Do not overfill (above UPPER line) the engine oil. Excessive engine oil may damage the
engine.
Selecting the proper engine oil
<Caution>
Use API class CC or higher engine oil.
Viscosity and Temperature
Temperature
Viscosity
8-2 Checking Coolant / Water
Danger: Injuries
To avoid accidental contact with the cooling fan or fan belts, do not operate this equipment
unless all doors are closed.
Danger: Burns
To avoid sustaining burns from hot vapor, do not open the radiator cap while operating or
immediately after stopping this equipment
C Caution: Burns
Due to extremely high temperatures, do not come in contact with the engine or muffler while
operating or immediately after stopping this equipment.
Check to see if the coolant/water level is between the FULL and LOW levels in the sub tank. If the
coolant/water is below the LOW level, fill the tank and the radiator accordingly.
Upper Level (5 1/2 Quarts.)
Effective Level
Lower Level (4 Quarts)
Over +68ºF
+50 to +67ºF
SAE30
SAE20
14
-4 to +49ºF
SAE10W/30

Advertisement

loading