Energy Saver Modes Of Gdi Machines; Overview - Ricoh K-C3 Service Manual

B245/B276/B277/B268/B269 Service Manual

Energy Saver Modes of GDI Machines

This section illustrates the energy saver modes of the GDI machine (the machine with the
optional controller). For the energy saver modes of the basic machine (the machine without
the optional controller), see the section of "Energy Saver Modes of Basic Machines".

Overview

The machine has three energy-saver modes: the Low Power Mode, the Transit Mode, and
the Night/Off Mode. The Transit Mode continues for about two seconds (probably, the user
does not recognize this mode when it occurs). The table lists the status of several
components. For the fusing temperature, see the section of "Fusing Temperature Control".
Operating Mode*
Low Power Mode
Transit Mode
Night/Off Mode
*
The "Operating Mode" here refers to all the modes (or status) other than the Low Power
Mode and Night/Off Mode. Actual power consumption (during the Operating Mode)
depends on job status and environmental conditions.
**
The SRAM is alive and backs up the engine controller.
Operation panel
On
Off
Off
Off
Engine
On
On
On
Off**
18-Jan-06
Exhaust fan
On
Off
Off
Off
244