B245/B276/B277/B268/B269 Service Manual
Cleaning Blade
1.
Drum charge roller (
2.
Cleaning blade [B] (
3.
When reassembling, adjust the image quality (
Reassembling
Apply toner to the edge of the new cleaning blade when you replace the cleaning
blade. This prevents possible damage to the OPC drum and blade.
1.
After installing the cleaning blade, remove some of the toner from
the old blade with your finger.
2.
Apply the toner to the edge [A] of the new cleaning blade. Make
sure to apply the toner evenly along full length of the new
cleaning blade.
Previous procedure)
x 2)
p.80).
18-Jan-06
78