Table of Contents
Advertisement
B245/B276/B277/B268/B269 Service Manual
3.
Insert the flash memory card [A].
4.
Press down the power switch on the operation panel and hold it, and turn on the
main switch.
5.
Select "Execute" [C].
6.
Do not touch any key while the message "Load Status..." shows. This message
indicates that the program is running.
7.
Make sure the message "End Sum..." shows. This message indicates that the
program has ended normally.
8.
Turn off the main switch.
9.
Remove the flash memory card.
10. Replace the card cover [B] (1 rivet).
11. Turn the main switch on.
12. Check the operation.
18-Jan-06
168
- Quick Links:
- Service Manual
Hide quick links:
Advertisement
Table of Contents
