B245/B276/B277/B268/B269 Service Manual
Installation Procedure
Unplug the copier power cord before starting the following procedure.
1.
Remove the strips of tape.
2.
Remove the left scale [A] (
3.
Place the DF exposure glass [B] on the glass holder. Make sure that the white
mark [C] is on the bottom at the front end.
4.
Peel off the backing [D] of the double-sided tape attached to the rear side of the
scale guide [E], then install the scale guide ( x 2 [removed in step 2]).
5.
Install the two stud screws [F].
6.
Mount the ARDF on the copier, and then slide it to the front.
x 2).
18-Jan-06
12