Viewing Module Configuration - Avaya P330 User Manual

Chapter 3
The following table provides a list of the fields in the Advanced tab of the
Device Information dialog box and their descriptions.
For more information on the user interface, refer to
and Tables” on page

Viewing Module Configuration

The Module Configuration dialog box provides you with information
specific to a selected module.
The General tab of the Module Configuration dialog box provides detailed
information about the module, such as the module’s position in the
device, the module’s type, description, number of ports, mode of
operation, and any faults occurring on the module.
The Advanced tab of the Module Configuration dialog box provides
information about expansion, cascading, and BUPS (BackUp Power
Supply) modules that are connected to the selected module.
23
Table 3-2. Device Information Fields - Advanced Tab
Field
STP Max Age
STP Hello Time
STP Forward Delay
17.
Description
The maximum age of Spanning Tree Protocol
information learned from the network on any
port before it is discarded, in milliseconds. This
is the actual value that this device is currently
using.
The amount of time, in milliseconds, between
the transmission of Configuration bridge PDUs
by this node on any port when it is the root of
the spanning tree or trying to become so. This
is the actual value that this device is currently
using.
This speed, in milliseconds, at which a port
changes its spanning state when moving
towards the Forwarding state. The value
determines how long the port stays in each of
the Listening and Learning states, which
precede the Forwarding state. This value is
also used, when a topology change has been
detected and is underway, to age all dynamic
entries in the Forwarding Database.
Avaya P330 Manager User Guide
“Using Dialog Boxes