Chapter 14
Adding and Removing SNMPv3 Managers
To add SNMPv3 managers to the table:
To remove SNMPv3 managers from the table:
Editing Trap Reporting Statuses
To edit the trap reporting status of an SNMPv1 manager, check or
uncheck the checkboxes next to the managers IP address.
Checked traps will be reported to the manager.
* Note: If the
To edit the trap reporting status of an SNMPv3 manager:
185
1. Open the device Trap Managers table and click on the
2. Click
.
Insert
3. Enter the IP address of the designated management station.
4. Select a
Notify Type
5. Click the
User Name
6. Select a name from the list.
7. Repeat the procedure for each user of the designated Notify Type.
8. Repeat the procedure for each Notify Type on the designated
manager.
9. Repeat the procedure for each manager.
1. Open the device Trap Managers table and click on the
2. Click the managers IP address.
3. Click
.
Delete
4. Repeat the procedure for each manager.
Trap Enable
reported to the selected manager.
1. Select a user from the User Name field.
2. Check or uncheck the checkboxes in the bottom part of the table.
.
field.
checkbox is not checked, no traps will be
Avaya P330 Manager User Guide
tab.
SNMPv3
tab.
SNMPv3