Viewing The Wan Trap Managers Table - Avaya P330 User Manual

Viewing the WAN Trap Managers Table

To view the Trap Managers table for an X330WAN expansion module:
* Note: Each X330WAN expansion module has its own Trap
The WAN Trap Managers table is used to configure the IP addresses of the
trap managers and their trap reporting statuses for WAN traps. Traps
include routing, WAN, and frame relay traps.
Frame relay traps can only be enabled or disabled per X330WAN
expansion module. If frame relay traps are enabled, all enabled managers
receive frame relay traps. If frame relay traps are disabled, no managers
will receive frame relay traps.
Avaya P330 Manager User Guide
1. Select the X330WAN expansion module for which you want to
view the Trap Managers table.
Managers table, which can be used to configure IP addresses
and trap managers for the specific module. Device wide trap
settings do not apply to traps from X330WAN expansion
modules in the device.
2. Click .
Or
Select
Configure > Trap Managers
opens.
Figure 14-4. WAN Trap Managers Table
Trap Managers Configuration
. The WAN Trap Managers table
182