Avaya P330 Manager Via Web Management - Avaya P330 User Manual

Avaya P330 Manager via Web Management

To start Avaya P330 Web Management:
Avaya P330 Manager User Guide
1. Point your web browser to http://xxx.xxx.xxx.xxx, where
xxx.xxx.xxx.xxx is the IP address of the Avaya P330 Device
you want to manage. The Password dialog box opens.
Figure 1-1. Network Password Dialog Box
2. Enter root in the
field. (Use a valid CLI password.)
Password
3. To save the password on your computer, check the
in your password list
4. Click . The Avaya P330 Welcome page opens.
OK
If the required Java plug-in is installed on your computer, the
—
Java Plug-in Security Warning dialog box opens after a few
seconds.
If the required Java plug-in is not installed, the plug-in is
—
automatically downloaded to your computer. Follow the
instructions on the Avaya P330 Welcome page to install the
plug-in.
field and the correct password in the
User Name
checkbox.
Introduction
Save this password
4