Configuring Snmpv1 Trap Managers - Avaya P330 User Manual

Chapter 14

Configuring SNMPv1 Trap Managers

The Device Trap Managers table
the IP addresses of the trap managers accessible via SNMPv1 and their
trap reporting statuses for device wide traps. Traps include power, fan,
faults, module insert/remove traps and others.
Figure 14-1. Device Stack Trap Managers Table - SNMPv1 Legacy Tab
* Note: The SNMPv3 tab only appears if the device is configured to
The following table provides a list of device trap types, their associated
icons, and their descriptions.
175
support SNMPv3 traps.
Table 14-1. Device Trap Types - SNMPv1 Legacy Managers
Icon Trap
Trap Enable
Power Supply Traps
Fan Traps
Fault Traps
Module Insert
Remove Traps
tab is used to configure
SNMPv1 Legacy
Description
Enables trap reporting for the selected
manager.
The trap reports the failure of a PSU.
The trap reports the failure of a fan.
A group of traps that report a fault in
the device.
The trap reports the insertion or
removal of a module in the device.
Avaya P330 Manager User Guide