Editing The Trap Managers Table; Adding And Removing Snmpv1 Managers - Avaya P330 User Manual

Editing the Trap Managers Table

You can add and remove managers from the Trap Managers table, and
you can edit the trap reporting status of specific managers.

Adding and Removing SNMPv1 Managers

To add SNMPv1 managers to the table:
To remove SNMPv1 managers from the table:
Avaya P330 Manager User Guide
1. Open the device-wide Trap Managers table and click on the
tab for device-wide traps.
SNMPv1 Legacy
Or
Open the G700 Trap Managers table for G700 traps.
Or
Open the X330WAN Trap Managers table for X330WAN traps.
2. Click .
Insert
3. Enter the IP address of the designated management station.
4. Repeat the procedure for each manager.
1. Open the device-wide Trap Managers table and click on the
tab for device-wide traps
SNMPv1 Legacy
Or
Open the G700 Trap Managers table for G700 traps.
Or
Open the X330WAN Trap Managers table for X330WAN traps.
2. Click the row with the manager’s IP address.
3. Click .
Delete
4. Repeat the procedure for each manager.
Trap Managers Configuration
184