At Commands For Modem Tasks - Motorola 3460 Fast’R User Manual

Table 3-1. Option-Set Default Options
Command
Sync Idle
V.25 Response
Parameters and options shown shaded gray vary by country. For details, refer
to Appendix B of the 3460 Fast'R Reference Guide.
1
Parameter option does not affect normal operation.

AT Commands for Modem Tasks

Table 3-2. AT Commands to Manage Option Sets
Load Option Set 1 into modem memory
Load Option Set 2 into modem memory
Specify that the modem loads Option Set 1 into
memory at subsequent power-ups
Specify that the modem loads Option Set 2 into
memory at subsequent power-ups
Specify that the modem loads the last-saved option
set (AT&W) at subsequent power-ups
Save the active configuration into Option Set 1
Save the active configuration into Option Set 2
AT Action Commands
AT commands for performing basic functions are as follows.
Table 3-3. AT "Action" Commands
Command & Option
+++
#####
A/
*The contents of the following S-registers are not automatically saved when
power is removed: 0, 1, 2, 3, 4, 5, 41, 42. To retain values, save them to an
option set. (S-Registers are storage areas for some parameter options.)
3-8
3460 Fast'R
Pre-Configured Default Option
Option Set 1
(Asynchronous)
1
AT V11=Char
*
AT VR1=V.25bis
*
To...
Enter Local Escape Mode
Enter Remote Escape Mode
Re-Execute Last Command
(continued)
Option Set 2
(Synchronous)
AT V11=Char
*
1
AT VR1=V.25bis
*
Enter This
Command:
ATZ0 or ATZ1
ATZ2
AT&Y1
AT&Y2
AT&Y0
AT&W0 or AT&W1
AT&W2
Description
1
1