Motorola 3460 Fast’R User Manual page 139

AT Command Set (continued)
Command Option
+FCLASS=?
0
1
2.0
+FCLASS=n
0
1
2.0
+FCR=n
0
1
+FLO=n
0
1
2
+FMI?
+FMM?
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country's options,
refer to the 3460 Fast'R Reference Guide (T0022).
Default (pre-set) options are underlined.
3460 Fast'R
Description
Service Class.
Tests the modem's Service Class.
Data modem
Service Class 1 fax modem
Service Class 2.0 fax modem
Service Class.
Specifies the modem's Service Class.
Data modem
Service Class 1 fax modem
Service Class 2.0 fax modem
Receive Fax Data.
Specifies whether the computer can receive fax data.
No
Yes
Fax Flow Control
Specifies the computer/modem flow control.
The *FL command also controls this value.
None
XON/XOFF in either direction
RTS/CTS
Manufacturer ID
Requests manufacturer ID from the modem when it is
operating in Fax Class 1 mode (+FCLASS=1).
The modem responds as follows:
Motorola
Modem ID
Requests modem ID from the modem when it is
operating in Fax Class 1 mode (+FCLASS=1).
The modem responds as follows:
3460
B-29