Table of Contents
Advertisement
Chapter 3
Advanced Modem Setup
Vanguard Daughtercard Setup
The Vanguard 3460 V.34 Daughtercard's default option set uses an
async protocol. However, the 3460 Daughtercard does not have a
computer port, so it cannot be cabled directly to a personal computer.
To configure the 3460 Daughtercard, connect a personal computer to the
modem card network-management port, and use Fast'RVu to set
options. Or, to configure for async applications only, set the modem's
Pass Through option. To do this, establish a call from one Vanguard port
(e.g., a CTP or PAD) to the 3460 Vanguard daughtercard port, and echo
AT commands through to the modem.
3-1
Advertisement
Table of Contents
Troubleshooting
