Motorola 3460 Fast’R User Manual page 138

AT Command Set (continued)
Command Option
&Y
0
1
2
&Zn n=1 - 4
+F commands control fax operation.
For all fax parameters:
• The AT+F[parameter]? command returns the valid options for the parameter, or if the
parameter is not supported, it returns ERROR. An example, showing the +FCLASS
parameter, is below.
• The AT+F[parameter]=? command returns the current option for the parameter, or if
the parameter is not supported, it returns ERROR. An example, showing the
+FCLASS parameter, is below.
+FCLASS?
0
1
2.0
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country's options,
refer to the 3460 Fast'R Reference Guide (T0022).
Default (pre-set) options are underlined.
B-28
3460 Fast'R
Description
Power Up in Option Set
=Old. On power up the modem uses the last saved
option set.
=1. On power up the modem uses Option Set 1.
=2. On power up the modem uses Option Set 2.
Select Phonebook Entry to Enter
Lets you store a telephone number in the modem's
Phonebook, up to 50 characters. Enter AT&Z or
AT CN, the entry (1-4), a comma, and the telephone
*
number. For example, to store the number
1-222-555-444 in Entry 3, enter:
AT CN3,12225554444<CR>
*
If you enter AT&Z or AT
• An entry, the modem stores the number in Entry 1.
• A telephone number, the specified entry's telephone
number is deleted.
+F Commands
Service Class.
Reads the modem's Service Class.
Data modem
Service Class 1 fax modem
Service Class 2.0 fax modem
CN without specifying:
*