Motorola 3460 Fast’R User Manual page 131

AT Command Set (continued)
Command Option
VC
*
0
1
VF
*
0
1
VI
*
0
1
VR
*
0
1
2
3
XC
*
0
1
2
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country's options,
refer to the 3460 Fast'R Reference Guide (T0022).
Default (pre-set) options are underlined.
3460 Fast'R
Description
V.25bis Character Code
=ASCII
=EBCDIC
V.25bis Format
=BitSync
=CharSync
V.25bis Synchronizing Idle Signal
=Mark
=Character
V.25bis Response
=None
=V.25bis
=V.25 Rate
=Val Only
Reliable Message
Applies to Reliable and Auto-Reliable data transfer
modes. The local modem can send a reliable message to
the computer with the normal connect message if both
modems negotiated a reliable connection.
=Disable.
=Short-Form Message Code. The modem sends a
message to the computer when a reliable connection is
successful. The message indicates the local computer-to-
modem data rate.
=Long-Form Message. The modem sends a message to
the computer when a connection is successful. The
message indicates the local computer-to-modem data
rate, and the error-correction and data-compression
schemes.
B-21