Tumbling Second Seat (Center Seat) - Toyota 2006 Sienna Owner's Manual

When returning the tumbled second
seat to its original position:
Once the seat is moved from
tumbled position to the folded- down
position, it cannot be directly returned
to the tumbled position again. (It is im-
possible to operate the seat in the or-
der 1→2→1.) When you return
folded- down seat (position 2) to its
tumbled position (position 1), you must
return the folded- down seat (position 2)
to its original position (position 3)
once. (It is possible to operate the seat
in the order 1→2→3→1.)
72
06 SIENNA_U (L/O 0603)
CAUTION
the
When folding or returning the seat,
observe the following precautions in
order to prevent personal injury:
Do not fold or remove the seat
D
while the vehicle is moving.
the
Be careful not to get your hands or
D
feet pinched in the seat.
When returning seats to their original
position, observe the following pre-
cautions in order to prevent personal
injury in a collision or sudden stop:
Make sure the seat
D
locked by pushing forward and rear-
ward on the top of the seatback or
by trying to pull up the edge of the
bottom cushion. Failure to do so
will prevent the seat belt from oper-
ating properly.
Make sure the seat belts are not
D
twisted or caught in the seatback
and are arranged in their proper
position and are ready to use.
—Tumbling second seat
(center seat)
TUMBLING SECOND SEAT
is securely
1. Lower the head restraint to the low-
est position. Hold the center of the
lever and pull it up. Then slide the
seat to the rear- most lock position.
2006 SIENNA from March '06 Prod. (OM45443U)