After Changing Wheels - Toyota 2006 Sienna Owner's Manual

Hide thumbs Also See for 2006 Sienna:

Table of Contents

Take due care in handling the or-

nament to avoid unexpected per-

sonal injury.

06 SIENNA_U (L/O 0603)

—After changing wheels

11. Check the air pressure of the re-

placed tire.

Adjust the air pressure to the specifi-

cation designated on page 501 in

Section 8. If the pressure is lower,

drive slowly to the nearest service

station and fill to the correct pressure.

Do not forget to reinstall the tire infla-

tion valve cap as dirt and moisture

could get into the valve core and

possibly cause air leakage. If the cap

is missing, have a new one put on as

soon as possible.

12.Restow all the tools and jack se-

13.Wrap the flat tire in the tire bag

and stow temporarily in the lug-

gage compartment. The tire bag

is stored with the jack handle.

As the tire carrier is designed for the

compact spare tire, the standard tire

cannot be stored there.

As soon after changing wheels as

possible, tighten the wheel nuts to the

torque specified on page 501 in Sec-

tion 8 with a torque wrench. Have a

technician repair the flat tire and re-

place the spare tire with it.

2006 SIENNA from March '06 Prod. (OM45443U)