Reinstalling Wheel Nuts - Toyota 2006 Sienna Owner's Manual

Hide thumbs Also See for 2006 Sienna:

Table of Contents

Before putting on wheels, remove any

corrosion on the mounting surfaces

with a wire brush or such. Installation

of wheels without good metal- to- met-

al contact at the mounting surface can

cause wheel nuts to loosen and

eventually cause a wheel to come off

while driving.

06 SIENNA_U (L/O 0603)

—Reinstalling wheel nuts

8. Reinstall all the wheel nuts fin-

Reinstall the wheel nuts (tapered end

inward) and tighten them as much as

you can by hand. Press back on the

tire and see if you can tighten them

Never use oil or grease on the

bolts or nuts. Doing so may lead

to overtightening the nuts and

damaging the bolts. The nuts

may loose and the wheels may

fall off, which could cause a seri-

ous accident. If there is oil or

grease on any bolt or nut, clean

2006 SIENNA from March '06 Prod. (OM45443U)