Automatic Door Locking And Unlocking Functions - Toyota 2006 Sienna Owner's Manual

The power door lock switch can be reset
in the following ways.
Turn the ignition key to "ON".
D
Unlock all the side doors and back
D
door with the key or wireless remote
control transmitter.
Unlock the driver's door or front pas-
D
senger's door with the inside
knob, and then unlock all the doors
and back door with the power door
lock switch.
CAUTION
Before driving, be sure that the doors
are closed and locked, especially
when small children are in the ve-
hicle. Along with the proper use of
seat belts, locking the doors helps
prevent the driver and passengers
from being thrown out from the ve-
hicle in an accident. It also helps pre-
vent the doors from being opened
unintentionally.
24
06 SIENNA_U (L/O 0603)
—Automatic door locking and
unlocking functions
AUTOMATIC DOOR LOCKING
You can select the following functions:
Locking linked with the shift position
D
All doors are automatically locked when
the selector lever is moved out of "P"
position.
Locking linked with vehicle speed
D
lock
All doors are automatically locked when
the vehicle speed goes above about 20
km/h (12 mph).
You can set or cancel the automatic
door locking functions:
Be sure to apply the parking brake when
performing the following operations.
To select the locking linked with the
shift position:
1. Close all doors and turn the ignition
key to the "ON" position.
2. Shift the selector lever to the "P" posi-
tion.
3. Within 10 seconds of turning the igni-
tion key to the "ON" position, press
and hold the driver's side power door
lock switch in the lock position for 5
seconds and then release.
The doors will be locked and unlocked
to indicate that the function is set.
To cancel the function, do the above op-
eration again.
To select the locking linked with the
vehicle speed:
1. Close all doors and turn the ignition
key to the "ON" position.
2. Shift the selector lever from "P" to the
"N" position.
3. Within 10 seconds of turning the igni-
tion key to the "ON" position, press
and hold the driver's side power door
lock switch in the lock position for 5
seconds and then release.
The doors will be locked and unlocked
to indicate that the function is set.
To cancel the function, do the above op-
eration again.
2006 SIENNA from March '06 Prod. (OM45443U)