Toyota 2006 Sienna Owner's Manual page 332

"AUTO" button
For automatic operation of the rear air
conditioning, press the "AUTO" button. An
indicator light will illuminate to show that
the automatic operation mode has been
selected.
In the automatic operation mode, the air
conditioning selects the most suitable fan
speed and air flow according to the tem-
perature.
You may use manual controls if you want
to select your own settings.
Fan speed selectors
Push the button to select the fan speed
mode.
In the automatic operation mode, the fan
speed is adjusted automatically unless you
desire another fan speed mode.
06 SIENNA_U (L/O 0603)
Temperature selectors
To increase the temperature, press the
" " side. To decrease it, press the " "
side.
"LO" appears when you adjust to maxi-
mum cooling, and "HI" appears when you
adjust to maximum warming.
When "SYNC" appears on the rear tem-
perature display, rear controls cannot be
used. Use the controls on the front control
panel. To cancel this function, push the
"SYNC" button. For details about
"SYNC" button, see "Front automatic air
conditioning system" on page 312 in this
Section.
The temperature display changes between
"_C" and "_F" when the unit of the outside
temperature display is changed. (For de-
tails, see "Multi- information display" on
page 326 in Section 1- 10.)
"REAR" button
To turn on the rear air conditioning system
using the front control panel, push the
button. To turn it off, push the button
again.
"OFF" button
Push the button to turn off the rear air
conditioning system.
the
Air flow selectors
Push the button to select the vents used
for air flow.
1. Panel—Air flows from the roof panel
vents.
2. Bi- level—Air flows from both the roof
panel vents and floor vent.
3. Floor—Air flows from the floor vent.
2006 SIENNA from March '06 Prod. (OM45443U)
321