Setting The Driving Position (Memory System); Recalling The Memorized Position - Toyota 2006 Sienna Owner's Manual

Hide thumbs Also See for 2006 Sienna:

Table of Contents

SETTING THE DRIVING POSITION

The key must be in the "ON" position and

the automatic transmission selector lever

is in the "P" position.

1. Adjust the driver's seat and outside

rear view mirrors to

push button "1" or "2" until a beep

The system can memorize up to 2 posi-

tions by repeating the above steps. If step

2 is performed when both buttons "1" and

"2" are memorized, the previous position

will be erased and a new position will be

To make only slight changes to an already

memorized position, the easiest way is to

first activate the memorized position, then

make the desired changes and perform

step 2 above.

06 SIENNA_U (L/O 0603)

When you push button "1" or "2", a

beep will sound and the driving posi-

tion will be automatically adjusted to

the position recorded for that button.

The memorized position can be recalled

under the following conditions:

The ignition key is in the "ON position

and the automatic transmission selector

lever is in the "P" position.

The key is not in the ignition switch

and less than 30 seconds have passed

since opening the driver's door.

2006 SIENNA from March '06 Prod. (OM45443U)