Raising Your Vehicle; Changing Wheels - Toyota 2006 Sienna Owner's Manual

Hide thumbs Also See for 2006 Sienna:

Table of Contents

—Raising your vehicle

6. After making sure that no one

is in the vehicle, raise it high

enough so that the spare tire

can be installed.

Remember you will need more ground

clearance when putting on the spare

tire than when removing the flat tire.

To raise the vehicle, insert the jack

handle into the jack (it is a loose fit)

and turn it clockwise. As the jack

touches the vehicle and begins to lift,

double- check that it is properly posi-

06 SIENNA_U (L/O 0603)

Never get under the vehicle when

the vehicle is supported by the

7. Remove the wheel nuts and

change tires.

Lift the flat tire straight off and put it

Roll the spare wheel into position and

align the holes in the wheel with the

bolts. Then lift up the wheel and get

at least the top bolt started through

its hole. Wiggle the tire and press it

back over the other bolts.

2006 SIENNA from March '06 Prod. (OM45443U)