Editing Area To Avoid - Toyota 2006 Sienna Owner's Manual

3. Set the cursor in the center of the
area to avoid, and touch "Enter".
4. Touch either or to change
the size of the area to be avoided.
5. Touch "OK".
INFORMATION
D If a destination is input in the area to
avoid or the route calculation cannot
be made without running through the
area to avoid, a route passing through
the area to be avoided may be shown.
D Up to 10 locations can be registered
as points/areas to avoid. If there are
10 locations already registered, the
following message will be displayed:
"Unable to register additional points.
Perform operation again after delet-
ing unnecessary points.".
ADVANCED FUNCTIONS

— Editing area to avoid

The name, location and/or area size of a reg-
istered area can be edited.
1. Touch "Edit".
2. Touch the desired area button.
77