Auto Setup; Custom Setup - AT&T 1070 Installation Manual

SYS EXT MAILBOX

AUTO SETUP

AUTO SETUP
PLEASE WAIT!
SYS EXT MAILBOX

CUSTOM SETUP

CUSTOM SETUP
PLEASE WAIT!
CUSTOM SETUP
MAILBOX #12
EXT #13 MAILBOX
NOTE: If the 1080
phone is the SYS EXT
mailbox for other
extensions, it answers
transferred calls from
its extension telephones
with a preset outgoing
message. You can neither
delete nor replace this
outgoing message.
SYS EXT mailbox (1080 only)
AUTO SETUP
Use this feature to automatically assign all 1070
and 1040 phones to individual 1080 mailboxes. If
a 1070 or 1040 phone is already using a specific
1080 phone as a mailbox, that assignment
remains.
1. Press [ENTER] on any 1080 telephone.
2. Press [ ] or [ ] until you see SYS EXT MAILBOX.
Press [ENTER].
3. Press [ ] or [ ] until you see AUTO SETUP. Press
[ENTER].
4. The screen shows PLEASE WAIT! with a beep to
confirm.
5. To move to the next feature, press [ ].
-OR-
To exit setup, press and hold [ENTER].
CUSTOM SETUP
Use this feature to individually assign 1070 and
1040 phones to a 1080 SYS EXT mailbox.
1. Press [ENTER] on any 1080 telephone.
2. Press [ ] or [ ] until you see SYS EXT MAILBOX.
Press [ENTER].
3. Press [ ] or [ ] until you see CUSTOM SETUP.
Press [ENTER], and the screen shows PLEASE
WAIT! to confirm.
4. Press [ ] or [ ] to choose the extension number
of the desired 1070 or 1040 phone.
5. Press [ ] or [ ] to select the extension number
of the desired 1080 system extension mailbox, or
choose NONE to turn off the system extension
mailbox.
6. Press [ ] highlight DONE then press [ENTER]. To
move to the next feature, press [ ].
-OR-
To exit setup, press and hold [ENTER].
53