Auto Att Delay - AT&T 1070 Installation Manual

AUTO ATT SETUP
06 SEC

AUTO ATT DELAY

AUTO ATT SETUP (1080 only)
AUTO ATT DELAY
Use this feature to choose how long this phone
rings before the auto attendant picks up a call.
One ring cycle lasts about six seconds.
1. Press [ENTER].
2. Press [ ] or [ ] until you see AUTO ATT SETUP.
Press [ENTER].
3. Press [ ] or [ ] until you see AUTO ATT DELAY.
4. Press [ ] or [ ] to choose the desired setting
(6–30 seconds).
5. To move to the next feature, press [ ].
-OR-
To exit setup, press and hold [ENTER].
NOTES:
• The DTAD answer delay time (ANSWER DELAY,
page 58) of all 1080 telephones in the same
system must be longer than the auto attendant
answer delay time (AUTO ATT DELAY).
• If multiple auto attendants are assigned in the
same system, you must select different AUTO
ATT DELAY settings for these telephones (at
least three seconds among them so they do not
all answer calls at the same time).
49