Line Group - AT&T 1070 Installation Manual

SPECIAL OPTIONS
PRIVATE LINE

LINE GROUP

Special options
LINE GROUP
If all of the sets have the default setting of
LINE 4, and all the extensions in your system are
connected to all lines, you can ignore this feature.
If there are extensions that have a private (not
shared) telephone line connected to line 4, choose
PRIVATE LINE. If you choose PRIVATE LINE,
then call transfer, hold, call privacy, and other
advanced features may not work correctly. Also,
no messages can be recorded on the 1080 auto
attendant mailbox for private lines on 1040 or
1070 telephone sets.
If there are lines that some, but not all, sets share,
connect them to line 4. Make sure that all those
extensions have the same line group number,
(LINE 04 - LINE 15).
Correctly assigning each group its own line group
number allows the Line 4 indicator lights, hold,
call transfer, and even ringing to work properly.
There is an example of a line group installation on
the next page.
1. Press [ENTER].
2. Press [ ] or [ ] until you see SPECIAL OPTIONS.
Press [ENTER].
3. Press [ ] or [ ] until you see LINE GROUP.
4. Press [ ] or [ ] to scroll through the line
group choices (LINE 04 ... LINE 15, or PRIVATE
LINE).
5. To move to the next feature, press [ ].
-OR-
To exit setup, press and hold [ENTER].
43
Continued on next page