AT&T 1070 Installation Manual page 25

Feature menu
All default settings are underlined.
Feature
ONE TOUCH
PREFERENCE
PROGRAM
VIEW
PHONE SETTINGS
EXTENSION NO
RINGER ON/OFF
RINGER TYPE
DELAY RING
AUTO-MUTE
TONE/PULSE
HOLD REMINDER
Function
Assign the one-touch keys on the right of the phone
as intercom or outside call shortcut keys, and enter
and view the outside phone numbers.
Assign the one-touch keys as
intercom or outside call shortcut
keys.
Store a telephone number into a one-
touch memory location.
View telephone numbers stored in
one-touch memory locations.
Customize the telephone functions for this phone.
Assign an extension number to
this phone. Extension numbers are
usually assigned automatically during
initial setup.
Turn the outside ringer on or off for
each line.
Select a ring pattern for this phone.
Set the length of time before incoming
outside calls will ring. One ring cycle
lasts about six seconds.
When on, sounds at this telephone
are not heard in response to a page
until you answer the page.
Set the dial mode for touch tone or
dial pulse (rotary) dialing.
Remind users with an audible tone
that a call at this extension is on
hold.
19
Options
INTERCOM,
TELEPHONE
up to 24 digits
(including
pause and #)
N/A
11 – 26
ON, OFF
Type 1, 2, 3, 4
OFF, 2, 4, 6, 8,
10, 12, 14, 16,
18, 20, 22, 24,
26, 28, 30 SEC
ON, OFF
TONE, PULSE
ON, OFF