AT&T 1070 Installation Manual page 65

DTAD SETUP
= 111
REMOTE CODE
DTAD setup (1080 only)
REMOTE CODE
Use this feature to select a three-digit number
to allow remote access from another telephone
(away from your home or office, see the 1080
user's manual for details) and internal access from
the SYS EXT telephones (See the 1070 or 1040
user's manual for details). This code is 111 by
default.
1. Press [ENTER].
2. Press [ ] or [ ] until you see DTAD SETUP.
Press [ENTER].
3. Press [ ] or [ ] until you see REMOTE CODE.
4. Press and hold [ ] to delete the current code.
Press the dial pad keys to enter a three-digit
remote access code (000-999).
5. To move to the next feature, press [ ].
-OR-
To exit setup, press and hold [ENTER].
59