Kyocera KM-6030 Service Manual page 109

2FB/2FC-3
Maintenance
item No.
U147 When selecting 6 (MODE6), the first 10k controls by MODE3, and MODE0 to MODE5 is automatically
set up according to the average of print coverage ratio of every 10k after it.
In accordance with the average print coverage ratio of 500, toner placing width of the execution time of
T7 control is decided.
Execution flow chart of T7 control (toner applying operation)
T7 control is performed when the accumulation output number of sheets from previous T7 control exceeds
500.
Example of T7 control (toner applying operation)
Previous T7 control
(1)
100-sheet output
Previous T7 control
(2)
Previous T7 control
(3)
Once interrupted and toner appying operation by 500 sheets.
Supplement
Firmware MAIN: After 2910DP-XXX.XX and ENGINE: After 2911EQ-XXX.XXXX setting possibility.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-4-35-1 1-4-36
To discontinue output once,
500 sheets
500-sheet output
Once interrupted and toner appying operation by 500 sheets.
500 sheets
600-sheet output
Once interrupted and
toner appying operation by 500 sheets.
T7 control
500 sheets
1200-sheet output
Description
Start
Outputting
Does
accumulation output
number of sheets
from previous T7 control
exceed 500?
Yes
execution of T7 control
T7 control
T7 control
500 sheets
200-sheet output 300-sheet output
T7 control
500 sheets
No
T7 control
Once interrupted and
toner appying operation by 500 sheets.
T7 control
500 sheets
400-sheet output
Once interrupted and
toner appying operation by 500 sheets.